Smoking Time Chart for Every Cut
One typical size per cut, its cook time at each smoker temperature, and when to pull it.
This chart lists one typical size of every cut with its cook time at each smoker temperature, before the rest. A 14 lb brisket runs about 13–18 hours at 225°F, a 7 lb pork butt about 8–10 hr 30 min at 250°F and a 14 lb turkey about 4 hr 30 min–6 hours at 275°F. Plan on the long end, then finish by internal temperature, not the clock.
Smoking times for every cut
| Cut | Size | 225°F | 250°F | 275°F | 300°F | 325°F | 175°F | 200°F | Pull at | USDA minimum |
|---|---|---|---|---|---|---|---|---|---|---|
| Baby Back Ribs | Unwrapped, 2–3 lb rack | 5–6½ hr | 4½–5½ hr | 3½–4½ hr | — | — | — | — | 195–203°F | 145°F |
| Beef Cheeks | 0.75 lb | 5½–7 hr | 4½–6 hr | 4–5 hr | — | — | — | — | 200–210°F | 145°F |
| Beef Ribs | Chuck short ribs, single bones | 5½–7 hr | 4½–6 hr | 4–5 hr | — | — | — | — | 200–205°F | 145°F |
| Bologna | 3 lb | 2½–3½ hr | 2¼–3 hr | 1¾–2½ hr | — | — | — | — | 150–160°F | Sold fully cooked |
| Brisket | 14 lb | 13–18 hr | 11–15 hr | 9–12 hr | — | — | — | — | 200–205°F | 145°F |
| Chicken Thighs | Large bone-in (8–10 oz each) | — | 2–2½ hr | 1½–2 hr | 1¼–1¾ hr | — | — | — | 175–185°F | 165°F |
| Chicken Wings | Jumbo split wings (about 12–14 pieces per lb) | — | 1¾–2¼ hr | 1½–2 hr | 1¼–1¾ hr | — | — | — | 175–190°F | 165°F |
| Chuck Roast | 4 lb | 6–8 hr | 5–7 hr | 4–6 hr | — | — | — | — | 195–205°F | 145°F |
| Cornish Hens | Large hen, 1.75–2 lb | — | — | 1½–2 hr | 1¼–1¾ hr | 1–1½ hr | — | — | 165–170°F | 165°F |
| Ham | 8 lb | 3–4¼ hr | 2¾–3¾ hr | 2¼–3¼ hr | — | — | — | — | 140–145°F | 140°F |
| Lamb Shoulder | 5 lb | 7–9 hr | 6–7½ hr | 5–6½ hr | — | — | — | — | 195–205°F | 145°F |
| Pork Butt | 7 lb | 10–12½ hr | 8–10½ hr | 6–8 hr | — | — | — | — | 198–205°F | 145°F |
| Pork Chops | 1.5 in boneless | 1–1½ hr | 1–1¼ hr | ¾–1 hr | — | — | — | — | 145–150°F | 145°F |
| Pork Ribs | Full spare rack (3½–5 lb) | 5½–7½ hr | 4½–6½ hr | 3½–5½ hr | — | — | — | — | 195–203°F | 145°F |
| Pork Shoulder | 10 lb picnic | 13–16 hr | 10½–13 hr | 8–10½ hr | — | — | — | — | 195–203°F | 145°F |
| Pork Tenderloin | 1.25 lb, 2–2.25 in thick | 1¾–2¼ hr | 1½–2 hr | 1–1½ hr | — | — | — | — | 145–150°F | 145°F |
| Prime Rib | 8.5 lb (4 ribs) | 3½–5 hr | 3–4¼ hr | 2½–3¾ hr | — | — | — | — | 115–125°F | 145°F |
| Rack of Lamb | Australian rack, 8 ribs (1.25–1.5 lb) | ¾–1¼ hr | ¾–1 hr | 35–50 min | — | — | — | — | 120–125°F | 145°F |
| Salmon | 1 inch (center-cut fillet) | 1¼–2 hr | — | — | — | — | 2–3 hr | 1½–2¼ hr | 145°F | 145°F |
| Sausage | Fresh chicken or turkey links (1 in) | 1¼–2 hr | 1–1½ hr | 1–1¼ hr | — | — | — | — | 160–165°F | 160°F |
| Spare Ribs | St. Louis cut, unwrapped | 5½–7 hr | 4½–6 hr | 3½–5 hr | — | — | — | — | 195–203°F | 145°F |
| Tri-Tip | 2.5 lb | 1½–2 hr | 1¼–1¾ hr | 1–1½ hr | — | — | — | — | 115–125°F | 145°F |
| Venison | Whole backstrap (2–3 lb) | 1¼–1¾ hr | 1–1½ hr | ¾–1¼ hr | — | — | — | — | 130–145°F | 145°F |
| Duck | 5 lb | — | — | 3¼–4¼ hr | 2¾–3½ hr | 2¼–3 hr | — | — | 165–175°F | 165°F |
| Fatty | 2 lb (stuffed) | 2½–3¼ hr | 2–2¾ hr | 1¾–2¼ hr | — | — | — | — | 160–165°F | 160°F |
| Turkey | 14 lb | — | — | 4½–6 hr | 4–5 hr | 3½–4½ hr | — | — | 165–170°F | 165°F |
| Turkey Breast | Bone-in breast, 4–5 lb | — | — | 2½–3¼ hr | 2¼–2¾ hr | 1¾–2½ hr | — | — | 165–170°F | 165°F |
| Whole Chicken | 5 lb | — | — | 2½–3¼ hr | 2–2½ hr | 1¾–2 hr | — | — | 165–170°F | 165°F |
One typical size per cut (the middle row of its table), cook time before the rest. A dash means that smoker temperature is not used for that cut. Each cut page has the full table by weight or size. The same numbers are in JSON and CSV.
How to read the chart
Each row is one cut at the size in the Size column, which is the middle row of that cut's full table. The temperature columns give hours of cook time from the moment the meat goes on until it reaches the pull temperature. The rest is not included: add it from the cut page (60–120 minutes for brisket, 20–40 minutes for a whole turkey) before you set a start time.
A dash means the cut is not smoked at that temperature. Whole birds start at 275°F so the skin renders, and salmon runs 175–225°F because fish dries out fast above that. Pull at is the internal temperature to take the meat off the smoker; USDA minimum is the FSIS safe minimum for that kind of meat. Where the pull temperature sits below the minimum, as with tri-tip, prime rib and rack of lamb, the cut page says so.
Why every cell is a range
Two pieces of the same weight can finish hours apart. The low end of a cell is a cook with a steady fire, a piece on the thin side of its size, few lid openings and a short stall. The high end covers a long stall, a cold or windy day, a smoker running below its dial, or a dense, heavily marbled piece.
The spread grows with the cut. A 2.5 lb tri-tip spans 30 minutes at 250°F (1 hr 15 min–1 hr 45 min); a 14 lb brisket spans 4 hours (11–15 hours). The stall causes most of that gap: brisket and pork butt hold near 150–170°F internal for hours while surface moisture evaporates and cools them. Wrapping at about 165°F internal stops the evaporation and shortens it.
What moves a cook toward the long or short end
- Thickness, more than weight. Heat travels in from the surface, so time follows the distance to the center. A 7-rib prime rib of about 15 lb weighs over three times as much as a 2-rib roast, yet takes about 5–7 hours at 225°F against 2 hr 30 min–3 hr 30 min, because added ribs make the roast longer, not thicker. Chops, tenderloin and salmon are listed by thickness for the same reason.
- Shape. A spatchcocked Cornish hen of 1.25–1.5 lb takes about 1 hr–1 hr 15 min at 275°F; the same hen left whole takes 1 hr 15 min–1 hr 45 min.
- Smoker type. Offsets and other wood burners move the most air, which dries the surface and stretches the stall; tight, humid electric smokers may barely stall, often with softer bark. Every smoker has hot and cool zones, so read the grate temperature with a probe clipped beside the meat, not the lid dial.
- Weather. Cold air, wind and rain pull heat from thin steel walls, and the smoker recovers slowly after each lid opening. Set it out of the wind (never in a garage or enclosed space) and expect the high end, or beyond, on a cold, windy day.
- A full smoker. Several cold pieces loaded at once drag the chamber down for the first hour, so a crowded cook runs toward the long end.
How to plan a cook with it
Work backward from the time you want to eat. Dinner time minus the long end of the cell, minus the longest rest, is the latest start. For a 14 lb brisket at 250°F, a 2-hour rest and dinner at 6:00 PM, that is 15 hours plus 2, so the brisket goes on by 1:00 AM. Light the smoker early enough to be stable at temperature by then.
An early finish costs nothing if you hold it right: wrap brisket or pork butt and keep it in a dry cooler lined with towels or a 150–170°F oven, at 140°F or above. Below 140°F, serve or refrigerate it within 2 hours. A late finish can only be fixed by turning up the heat, which is why the plan uses the long end.
Choosing the smoker temperature column
The gap between columns matters most on long cooks. A 7 lb pork butt drops from about 10–12 hr 30 min at 225°F to 6–8 hours at 275°F, while a 2.5 lb tri-tip moves only from 1 hr 30 min–2 hours to 1 hr–1 hr 30 min. Use 275°F when time is tight on a big, tough cut; stay at 225°F for roasts you want evenly pink. Whole poultry belongs at 275°F or above so it climbs quickly through the 40–140°F range.
When to open the cut page instead
- Your piece is far from the size shown: a 10 lb or 18 lb brisket, a 20 lb turkey, a 2-rib roast. Each cut page has a row for every common size and a calculator that interpolates by weight.
- Ribs: rack type and wrapped versus unwrapped change the time, and the rib pages list each combination.
- You need the method: trim, seasoning, where to wrap, where to probe, how long to rest and how to slice.
- Safety detail for a specific cut: fully cooked versus fresh ham, ground meat in a fatty or sausage, and which pull temperatures sit below the USDA minimum.
- You only need temperatures: the smoking internal temperature chart lists pull targets, USDA minimums and probe placement for every cut.
Gear for this cook
Links go to Amazon search results. As an Amazon Associate, HowLongToSmoke earns from qualifying purchases.
- Dual-probe wireless thermometerOne probe in the meat and one at the grate shows how far your smoker runs from its dial.
- Grate-clip temperature probeReads the air right beside the meat, where the chart's temperatures apply.
- Pink butcher paper rollWrapping at the stall pulls a long cook back toward the short end of its range.
- Smoking log bookWrite down weight, weather and finish time to learn where your smoker lands in each range.
Questions
Does the chart include resting time?
No. Each cell is cook time to the pull temperature. Add the rest from the cut page: 60–120 minutes for brisket, 30–60 minutes for pork butt and 20–40 minutes for a whole turkey.
Why not just use minutes per pound?
Per-pound rules only fit middle sizes. They overstate long roasts such as a 7-rib prime rib, where time follows thickness, and understate small, tough pieces such as beef cheeks, which take 5–6 hours at 225°F even at half a pound.
Why did my cook run longer than the chart?
The usual causes are a smoker running below its dial, wind or cold, frequent lid openings and a long stall. Check the grate with a separate probe; if you are behind, raise the smoker 25°F or wrap once the bark has set.
Can I download these numbers?
Yes. The JSON and CSV files linked under the table hold every row of every cut, not only the middle size, with pull temperatures and USDA minimums.
Sources
- Safety temperatures: USDA FSIS: Safe Minimum Internal Temperature Chart
- Method: AmazingRibs: Understanding and Beating the Barbecue Stall; AmazingRibs: The Texas Crutch; Traeger: Tips and Tricks for Winter Grilling